Quality Risk Management in Infusation Product Distribution Using Failure Mode and Effect Analysis (FMEA) and Analytical Hierarchy Process (AHP) Methods

Elis Dwiana Ratnamurni; Eka Ludiya; Amanda Luthfiartie

doi:10.46729/ijstm.v3i1.429

Elis Dwiana Ratnamurni Management, Jenderal Achmad Yani University, Jawa Barat Indonesia.
Eka Ludiya Management, Jenderal Achmad Yani University, Jawa Barat Indonesia.
Amanda Luthfiartie Management, Jenderal Achmad Yani University, Jawa Barat Indonesia.

DOI: https://doi.org/10.46729/ijstm.v3i1.429

Keywords: Quality risk management, Capital, Failure Mode and Effect Analysis (FMEA) , Analytical Hierarchy Process (AHP).

Abstract

This study aims to determine the causes of product leaks so as to minimize the risks of product quality degradation. The research method used is descriptive qualitative research method, data collection techniques used are observation, interviews and documentation. The collected data is then analyzed to obtain useful information to solve a problem in research. The process of testing the validity and reliability in this study uses a triangulation process. In this study, to measure Quality Risk Management, FMEA is used as a tool to measure or identify the source or cause of a quality problem. The next method to solve problems or risks in Quality Risk Management is AHP. The results of the study can be concluded that, Quality Risk Management in the distribution of Infusion products. The risk with the highest RPN value is the risk of damaged goods in the distribution flow of releasing goods from the warehouse to the expedition of PT. BSP which causes a leak in the softbag packaging. These risks are then analyzed to find the best alternative for handling them. Determine alternative handling of Quality Risk Management in the distribution of Infusion products at PT. BSP using the AHP method. Based on calculations using Expert Choice 11 software, the priority criteria are time and handling effectiveness which has the highest pairwise comparison value is the alternative of adding product handling information labels on cardboard packaging.

Downloads

Download data is not yet available.

References

https://kominfo.go.id/

Mudin, N. (2018). Penjaminan Mutu dalam Pendistribusian Sediaan Farmasi. Majalah Farmasetika.

Kumar, N., & Jha, A. (2018). Quality risk management during pharmaceutical ‘good distribution practices' – A plausible solution. Bulletin of Faculty of Pharmacy, Cairo University.

Assem, A. (2018). Implementation of Quality Risk Management for Manufacturing of a Non-Sterile Pharmaceutical Product-Case Study. Cohesive Journal of Microbiology & Infectious Disease.

Dermawan, D., Bahtiar, R., & Sofian, F. F. (2017). Tinjauan Implementasi Penilaian Risiko Terintegrasi Terhadap Manajemen Rantai Pasok pada Industri Farmasi.

Hosama, M. D. (2020). Pengaruh Penerapan Dimensi Enterprise Risk Management dalam Meningkatkan Nilai Perusahaan (Studi pada Perusahaan BUMN Di Indonesia Periode 2015-2018).

Rahmawati, A., & Wijaya, A. F. (2019). Analisis Risiko Teknologi Informasi Menggunakan ISO 31000 pada Aplikasi iTop. Jurnal Sistem Informasi dan Teknologi, 14.

Rozudin, M. (2019). Usulan Pengelolaan Risiko Rantai Pasokan Hijau pada Produksi Bogie S2HD9C dengan Pendekatan House of Risk (Studi Kasus : PT. Barata Indonesia).

Sambodo, A., Kuncoro, D. K., & Gunawan, S. (2020). Analisis Mitigasi Risiko Operasional Kontra Bank Garansi PT. Asuransi Kredit Indonesia Kantor Cabang Balikpapan Berbasis ISO31000. Journal Industrial Servicess Vol. 5 No. 2, 150.

Soetopo, A. A., Willar, D., & Manoppo, F. J. (2019). Pemodelan Pengelolaan Risiko Proyek Pembangunan Jaringan Irigasi Sangkub Kiri Kabupaten Bolaang Mongondow. Jurnal Ilmiah Media Engineering VoL. 7 N, 824.

Kumar, A., Zavadskas, E. K., Mangla, S. K., Agrawal, V., Sharmad, K., & Gupta, D. (2018). When Risks Need Attention: Adoption of Green Supply Chain Initiatives in the Pharmaceutical Industry. International Journal of Production Research.

O'Connor, T., Yang, X., Tian, G., Chatterjee, S., & Lee, S. (2017). Quality Risk Management for Pharmaceutical Manufacturing : The Role of Process Modeling and Simulations.

Project Management Institute. (2019). Corporate Risk Management: Theories and Applications. Newton: Project Management Institute.

Rahmawati, A., & Wijaya, A. F. (2019). Analisis Risiko Teknologi Informasi Menggunakan ISO 31000 pada Aplikasi iTop. Jurnal Sistem Informasi dan Teknologi, 14.

Sellang, K., Jamaluddin, & Mustanir, A. (2019). Strategi dalam Peningkatan Kualitas Pelayanan Publik : Dimensi, Konsep, Indikator dan Implementasinya. Pasuruan: Qiara Media Partner.

Sommerfeld, D., Teucke, M., & Freitag, M. (2018). Identification of Sensor Requirements for a Quality Data based Risk Management in Multimodal Supply Chains. 51st CIRP Conference on Manufacturing Systems.

Supriadi, A., Rustandi, A., Komalina, D. H., & Ardiani, G. T. (2018). Analytical Hierarchy Process (AHP) Teknik Penentuan Strategi Daya Saing Kerajinan Bordir. Yogyakarta: Deepublish.

Tse, Y. K., Zhang, M., Tan, K. H., Pawar, K., & Fernandes, K. (2018). Managing Quality Risk in Supply Chain to Drive Firm's Performance: The Roles of Control Mechanisms. Journal of Business Research.

Sartor, M., & Orzes, G. (2019). Quality Management: Tools, Methods and Standards. Bingley: Emerald Publishing Limited.

Tian, G., Koolivand, A., Arden, N. S., Lee, S., & O’Connor, T. F. (n.d.). Quality risk assessment and mitigation of pharmaceutical continuous manufacturing using flowsheet modeling.

Tripathy, D. P. (2019). Mine Safety Science and Engineering: Health and Disaster Management. New York: Taylor & Francis Group.

Demartini, P. P., & Marchiori, P. M. (2018). The Proceedings of the 17th European Conference on Research Methodology for Business and Management Studies. Reading: Academic Conferences and Publishing International Limited.