Identifying The Working Process Of Automatic Fish Feed Tool Based On Arduino Uno

Ertie Nur Hartawati

doi:10.46729/ijstm.v2i5.356

Ertie Nur Hartawati Faculty of Computer Science and Information Technology, Gunadarma University, Indonesia

DOI: https://doi.org/10.46729/ijstm.v2i5.356

Keywords: Arduino Uno, RTC Sensor, LCD, Automatic fish feed, Servo Machine, Acrylic

Abstract

This Arduino-Based Automatic Fish Feeding Tool is a tool that serves to make it easier to care for fish in the aquarium, especially the feeding. The purpose of making this automatic fish feed tool is to explain about the automatic fish feed tool. The ability of this tool is that it can provide feed automatically with the given time plan is feeding 2 times a day and for the amount of feed dose adjusted to the number of servo motor rotations, namely 1 rotation of 150˚, resulting in a feed dose of 10 Grams. With the working method using the Arduino IDE application and with the Arduino Uno working system, a command coding is given which is combined with the Uno shield board then jumper to the RTC DS3231 so that it can show the time very accurately and update the time data in real time.

Downloads

Download data is not yet available.

References

. Andik Giyartono, Priandhana Edy Kreshna . (2015). “Aplikasi Android Pengendali Lampu Rumah Berbasis Mikrokontroler ATMEGA328”. jakarta

. Rahmat Faizal, Muh. Rian Eka Duri. (2020). “Perancangan Smart Light Dengan Memanfaatkan Mikrokontroler Arduino Untuk Menyalakan / Mematikan Lampu Berbasis Perintah Suara Via Android”. Makasar

. Nurmasyitah, (2017). “Penentuan Konstanta Dielektrik Akrilik”. Jurnal Jeumpa

. Djuandi F. (2011). Pengenalan Arduino. E-Book. Www.Tobuku, 1-24

. Kadir, A. (2012). Panduan Praktis Memperlajari Aplikasi Mikrokontroler Dan Pemrogramannya Menggunakan Arduino. Yogyakarta: Andi.

. Sainsmart. (2015). Datasheet LCD 16X2, Lenexa, Kansas, Amerika Serikat

. Sainsmart. (2015). Datasheet Arduino uno, Lenexa, Kansas, Amerika Serikat

. Moh Handigar, Hafidzh Randy.(2019) “Pembangunan Pemakan Ikan Otomatis Menggunakan Arduino” Yogyakarta

. R. Suharmon, “Perancangan Alat Pemberi Makan Ikan Otomatis dan Pemantau Keadaan Akuarium Berabasis Mikrokontroler Atmega8535”, Teknik Elektro, Medan, 2014.