Assessment of Human Factors Causes of Occupational Risk in the Chemical Industry Using the Analytic Network Process (ANP) Method
Abstract
The development of the industry in Indonesia is inseparable from the analysis of the production process and identification of the risk of causing work accidents. In every production process in the chemical industry there are various risks that cause occupational accidents, the biggest cause of accidents comes from human factors. It required a priority assessment of workplace accidents influence on the human factor as the cause of the rising incidence of labor in the production process in the chemical industry with the method of Analytic Network Process (ANP) , of the assessment results using ANP method can be determined to set a risk management strategy causes of accidents. ANP method is done by determining goals, criteria, and sub criteria. In this case the criteria are the production process and the sub criteria are human factors that cause the risk of work accidents. Furthermore, the value of influence between criteria is determined, between criteria and sub criteria and between sub-criteria . The results obtained are the highest limiting values for criteria, namely the final product process and sub-criteria, namely human factors not using PPE . Strategies that can be taken to control risk is by giving reward and punishment, providing HSE training, as well as the management is partially responsible for HSE
Downloads
References
C. Huang, R. H., Yang, C., Kao, “Assessment Model For Equipment Risk Management: Petrochemical Industry Cases”,” Saf. Sci., vol. Vol. 50, pp. 1056–1066, 2012.
M. Bouloiz, H., Garbolino, E., Tkiouat, “Contribution of a systemic modeling approach applied to support risk analysis of a storage unit of chemical products in Morocco,” Loss Prev. Process Ind., vol. Vol. 23, pp. 312-322., 2010.
Anny Maryani, “Pemodelan Kecelakaan Kerja Konstruksi Yang Komprehensif Untuk Mengendalikan Biaya K3, Tesis Master, Institut Teknologi Sepuluh Nopember, Surabaya,” 2012.
N. L. Hanum, “Implementasi Bahavior Based Safety Pada Sistem Manajemen Keselamatan Kerja Guna Meningkatkan Safe Behavior Pekerja, Tugas Akhir Sarjana, Institut Teknologi Sepuluh Nopember, Surabaya.”
Dwi Iryaning, “Mitigasi Risiko Berbasis Sistem Treceability Pada Rantai Pasok Makanan, Tesis Master, Institut Teknologi Sepuluh Nopember, Surabaya.,” 2012.
C. “ Marhavilas, P.K., Koulouriotis, D.E., Mitrakas, “On the Development of a New Hybrid Risk Assessment Process Using Occupational Accidents’ Data: Application on the Greek Public Electric Power Provider”,” J. Loss Prev. Process Ind., vol. Vol. 24, p. hal. 671-687., 2011.
R. Patradhiani, “Model Pengembangan Risiko Kecelakaan Kerja Dengan Pendekatan Perilaku Manusia Menggunakan Metode Causal Effect Diagram,” 2013.
D. Iryaning, “Multi Kriteria Terhadap Penilaian Penyebab Kejadian RIsiko Kecelakaan Kerja Pada Proyek Konstruksi Dengan Metode Analytic Network Process,” J@ti Undip J. Tek. Ind. Univ. Diponegoro, Semarang, vol. Vol 13, no. No. 1 Januari 2018, 2018.
Badri, A., Nadeau, S., Gbodossou, A., “Proposal of A Risk-Factor-Based Analytical Approach for Integrating Occupational Health and Safety Into Project Risk Evaluation”,” Accid. Anal. Prvention., 2011.
Mardiantony, T., “Penerapan Analisis Input Output dan ANP dalam penentuan prioritas pengembangan di Sektor industri jawa timur, Tugas Akhir Sarjana, Institut Teknologi Sepuluh Nopember, Surabaya,” 2012.
